What is modal fabric? How it is made, how it is labelled, and its footprint
By Ketul Patel • • 8 min read

What is modal fabric? It is a soft rayon fibre made from wood pulp, mostly used for underwear, T-shirts, loungewear and bed linen. This guide explains how modal is made, how it is named on labels, its carbon footprint per kg, and what buyers ask a supplier who sells it.
What is modal fabric? The short answer
Modal is a man-made cellulose fibre. The cellulose comes from trees, but a factory dissolves the wood pulp and spins it into new fibre, so modal is semi-synthetic, not a natural fibre like cotton.
Under US labelling rules it counts as rayon. The FTC's fibre definitions define rayon as a manufactured fibre of regenerated cellulose, and modal fits that definition.
Man-made cellulose fibres are a small slice of the market. Textile Exchange's Materials Market Report 2026 puts them at 7% of the 139 million tonnes of fibre made in 2025. Viscose is the largest member of the family; modal and lyocell are smaller.
The best-known brand is TENCEL Modal from Lenzing AG. Lenzing's fibre snapshot gives a cradle-to-gate footprint of 2.84 kg CO₂e per kg of fibre. Generic modal from other makers can differ.
How modal fabric is made, from tree to yarn
Modal starts as wood. Lenzing lists beech, spruce, eucalyptus, birch, maple, southern pine and acacia among the species used for its dissolving pulp.
The wood is pulped to extract cellulose. The pulp is dissolved with chemicals, pushed through fine holes in a spinneret, and hardened in a bath into continuous filaments.
The filaments are washed, cut into short staple and baled. Spinners then turn the staple into yarn, often blended with cotton or elastane, and knitters or weavers turn the yarn into fabric.
The route is close to the one used for viscose. Lenzing describes its own modal process as resource-efficient, with high recovery rates for the chemicals it uses.
Each step uses energy and chemicals, so where and how the fibre is made matters for its footprint. That is why branded and generic modal can carry different figures.
- WoodBeech, eucalyptus and other species
- Dissolving pulpCellulose separated from the wood
- Spinning bathPulp dissolved, extruded and hardened
- Staple fibreWashed, cut and baled
- Yarn and fabricSpun, often blended, then knitted or woven
Modal vs viscose, lyocell and rayon: how the names fit
Rayon is the family name. Viscose, modal and lyocell are members of that family, made from cellulose but by different routes.
The FTC definition of rayon allows the word lyocell for fibre precipitated from an organic solvent with no chemical intermediates. The same section also adopts the generic names in ISO 2076:2013, so check that standard before you print a fibre name for the US market.
In the EU, fibre names on labels come from the list in Regulation (EU) No 1007/2011 on textile fibre names. Use the exact name in its annex, not a trade name alone.
This is general information, not legal advice. Our viscose vs rayon comparison explains the family in more depth.
How modal feels and where it is used
Modal is chosen for softness and drape. Lenzing says the fibre's cross-section and strength favour soft fabric that can take repeated washing and drying.
Most modal goes next to the skin. Lenzing's own product sheet lists underwear, loungewear, sleepwear, hosiery, T-shirts, towels and bed linen among its uses.
It is often blended. Modal is sold on its own, but it is also mixed with viscose, cotton, elastane, lyocell or silk, so check the full fibre list for each product.
Blends matter for a footprint. Each fibre in the blend carries its own factor, so a 5% elastane share can weigh more than its weight suggests.
Modal is also sold with extras. Lenzing offers spun-dyed black modal, where the pigment goes into the fibre, and a micro version with finer fibres for very light knits.
Lenzing says its spun-dyed black fibre can cut the carbon footprint by up to 60% against conventional dyeing, citing a 2014 study by Terinte and others in the Journal of Cleaner Production. That figure compares dyeing routes, not fibres.
Modal fabric carbon footprint per kg
Our calculator uses 2.84 kg CO₂e per kg for modal fibre. The figure is from Lenzing's TENCEL Modal snapshot, calculated in the Higg MSI database v3.8 for production in Austria and China.
It covers cradle to fibre gate only. Spinning, knitting, dyeing and sewing come on top, so a kilogram of finished modal fabric carries more than 2.84 kg.
The figure is brand-specific. Lenzing itself states that, by Higg MSI, its modal has at least 50% lower carbon emissions than generic modal. We have no published generic modal factor we can trace to a primary source, so treat 2.84 as a low case for unbranded fibre.
Compare factors per kg, never per product. The chart shows the per-kg factors our calculator uses; each has its own source on its material page, and the boundaries differ.
Lenzing reports water too: 57.89 kg of water consumption per kg of TENCEL Modal fibre. Our emission factors guide explains how to read figures like these.
Older published research points the same way for Lenzing's own sites. A 2010 life cycle assessment by Shen, Worrell and Patel, published in Resources, Conservation and Recycling, compared Lenzing's viscose, modal and lyocell with cotton, polyester and polypropylene, cradle to factory gate.
It found the lowest overall impact for the modern Lenzing fibres, modal among them. Viscose made in Asia came out higher, close to polyester. The data are from 2010, so use them for context, not as a current factor.
Biogenic carbon: the carbon stored in modal
Modal is made of cellulose, so it holds carbon that the tree took from the air. Lenzing's snapshot gives a biogenic carbon content of 0.39 kg of carbon per kg of fibre, which it states as 1.4 kg of CO₂.
That stored carbon is not subtracted from the 2.84 kg. The rules in ISO 14067 ask for biogenic carbon to be reported separately, not netted off the fossil total. Our glossary entry on biogenic carbon explains why.
The carbon goes back to the air when the fibre burns or breaks down. Counting it as a permanent saving would overstate the benefit.
Worked example: the fibre in a modal T-shirt
Take a T-shirt with 180 g of modal fibre in it. This weight is our example.
The fibre footprint is the weight times the factor: 0.18 kg × 2.84 kg CO₂e/kg = 0.51 kg CO₂e. That is fibre only, at the fibre gate.
Add the fibre lost in spinning and cutting. If 10% of the fibre bought never ends up in the shirt, you buy 0.20 kg, and the fibre line rises to about 0.57 kg.
Now add the factory. Spinning, knitting, dyeing and sewing are where the T-shirt footprint mostly sits, and your own energy bills decide that part.
Blends change the sum. If the same shirt were 95% modal and 5% elastane, the 9 g of elastane at 15.0 kg CO₂e/kg would add about 0.14 kg on its own.
So the fibre is rarely the whole story. A garment's weight, its factory energy and how often it is washed usually move the total more than a switch between modal and another fibre.
What buyers check when you sell modal
Buyers want to know which modal you used. A branded fibre with its own published footprint and a generic fibre from an unnamed mill are not the same input.
Expect questions on wood sourcing too. Textile Exchange reports that two-thirds of man-made cellulose fibres were made from FSC or PEFC controlled or certificated feedstock in 2025; buyers will ask which side your fibre is on.
Common mistakes are easy to avoid. Using the viscose factor for modal, or the Lenzing factor for an unbranded fibre, both give a wrong answer. So does leaving elastane out of a blend.
Never call modal “natural” or “eco-friendly” on its own. Give the figures with their sources instead, as our guide to the EU environmental claims rules explains.
Traceability is the next question. Lenzing offers fibre identification and a traceability platform for its branded fibres, so a buyer can ask you to prove the fibre in the garment is the one on the invoice.
Keep the evidence per order, not per year. A buyer's auditor will match the fibre invoice, the yarn and fabric orders and the garment count, so file them together.
- Name the fibre maker and whether the fibre is branded or generic
- Keep the fibre supplier's invoice and certificate numbers on file
- Use a factor that matches the fibre, with its source and year
- List every fibre in the blend with its share, including elastane
- Include fibre lost in spinning and cutting
- Report biogenic carbon separately, not netted off
- State the boundary: cradle to gate or cradle to grave
What to do next
Start with the bill of materials. List the fibre weights per product and the fibre maker for each.
Then run the product through our product carbon footprint calculator. It uses the factors above and adds your factory energy, packaging and transport.
If a buyer has asked for a footprint, our guide to answering a customer carbon footprint request shows what to send. You can also analyse a product from its listing in a few minutes.
Comparing fibres for a new range? Our lyocell vs cotton comparison and rayon vs cotton comparison show the per-kg factors side by side. For natural fibres, see our guides to wool fabric and hemp fabric.
Sources and further reading
Lenzing AG, TENCEL Modal fibre snapshot (10-2024): b2b.tencel.com
US Federal Trade Commission, 16 CFR 303.7, generic names for manufactured fibres: eCFR
Textile Exchange, Materials Market Report 2026: textileexchange.org
Regulation (EU) No 1007/2011 on textile fibre names: EUR-Lex
Shen, Worrell and Patel (2010), Environmental impact assessment of man-made cellulose fibres, Resources, Conservation and Recycling 55(2): DOI
Our emission factors and their sources: methodology
Questions
Is modal a natural fabric?
No. Modal is made from natural cellulose in wood, but a factory dissolves the pulp and spins it into new fibre. US rules treat it as rayon, a manufactured fibre.
Is modal the same as rayon?
Modal is a type of rayon. Rayon is the family of regenerated cellulose fibres; viscose, modal and lyocell are its main members.
What is the difference between modal and viscose?
Both are made from dissolved wood pulp by a similar route, and both count as rayon in the US. In our factor library, Lenzing's modal is 2.84 kg CO₂e per kg and the viscose factor is 5.30.
Is modal plastic?
No. Modal is regenerated cellulose from wood, not a polymer made from oil or gas. Polyester, nylon and elastane are the plastic fibres; see our guide on whether polyester is plastic.
What is TENCEL Modal?
TENCEL is Lenzing AG's fibre brand, and TENCEL Modal is its modal fibre. Lenzing publishes a cradle-to-gate footprint of 2.84 kg CO₂e per kg for it, based on Higg MSI v3.8.
What is the carbon footprint of modal fabric?
Lenzing's modal fibre comes to 2.84 kg CO₂e per kg at the fibre gate. Finished fabric is higher, because spinning, knitting and dyeing add their own energy. Generic modal can differ from Lenzing's figure.
Is modal better than cotton for the climate?
We do not rank fibres. Per kg, our library holds 2.84 kg CO₂e for Lenzing modal and 4.17 for conventional cotton grown in India, but the fabric, factory and use phase often decide the product total.
Does modal shrink or pill?
It depends on the yarn, the fabric build and the finish more than the fibre name. Lenzing says its modal fibre withstands repeated washing and drying; follow the care label and test your own fabric.



