← All guides
For suppliers • Regulation

Carbon credit trading scheme: what India's CCTS means for mills

By • • Updated • 9 min read

India's carbon credit trading scheme (CCTS) sets legally binding greenhouse gas intensity targets for named plants and lets them trade carbon credit certificates. Since January 2026 those targets cover 173 textile units in spinning, processing, fibre and composite mills. This guide explains the dates, the arithmetic and what a textile, garment or packaging manufacturer should do now.

What the carbon credit trading scheme is

The carbon credit trading scheme is India's carbon market. The Ministry of Power notified it on 28 June 2023 as S.O. 2825(E), under section 14(w) of the Energy Conservation Act, 2001 (Gazette notification).

The power to create it came from the Energy Conservation (Amendment) Act, 2022. That Act came into force on 1 January 2023.

The scheme defines a carbon credit as one tonne of CO2 equivalent (CO2e) reduced, removed or avoided. It runs on two tracks: a compliance mechanism for named plants and an offset mechanism for voluntary projects.

Most garment units are not on a schedule. But many buy yarn and fabric from mills that are, and those mills now track intensity every month. Their figures will flow into your product footprints and your buyers' questions.

This guide summarises official notifications. It is not legal advice.

490plants with binding targets
173of them textile units
1 t CO₂eper carbon credit
2×average price as compensation for a shortfall
Sources: PIB release of 22 January 2026; G.S.R. 25(E) of 13 January 2026; CCTS 2023; G.S.R. 739(E) of 8 October 2025.

CCTS timeline: from the 2022 Act to textile targets

The scheme was built in steps over three years, and textiles joined in January 2026. The first full compliance year for textile units is FY 2026-27.

Offsets were added by an amendment on 19 December 2023, S.O. 5369(E). Targets are set under the Environment (Protection) Act, 1986, by the environment ministry.

The first targets came in the Greenhouse Gases Emission Intensity Target Rules, 2025, dated 8 October 2025. They covered aluminium, cement, chlor-alkali, and pulp and paper.

An amendment of 13 January 2026 added refineries, petrochemicals, textiles and secondary aluminium. A PIB release put the new entities at 208 and the total at 490.

For the textile schedule, the 2025-26 target is pro rata for January to March 2026 only. The 2026-27 target keeps the reduction rate the unit would have had over a full year.

  1. 1 Jan 2023
    Energy Conservation (Amendment) Act in forceAllows a carbon credit trading scheme
  2. 28 Jun 2023
    CCTS notifiedS.O. 2825(E)
  3. 19 Dec 2023
    Offset mechanism addedS.O. 5369(E)
  4. 20 Sep 2024
    Ten offset sectors approvedIn two phases
  5. 8 Oct 2025
    First targetsFour sectors, 282 entities
  6. 13 Jan 2026
    Textiles added173 textile units; 490 entities in all
  7. 31 Mar 2026
    End of the short first textile yearPro rata target for Jan–Mar 2026
  8. 26 Jun 2026
    Draft iron and steel targetsPublished for comment
  9. FY 2026-27
    First full textile compliance yearTarget against the 2023-24 baseline
Dates from the Gazette notifications, BEE documents and PIB releases listed under Sources.

Who runs India's carbon market

Five bodies share the work, with the Bureau of Energy Efficiency (BEE) as administrator. The 2023 notification sets each role.

A government reply in the Lok Sabha confirmed the set-up in December 2025. It also said the textile sector moved across from the older PAT energy-efficiency scheme. Thermal power plants did not.

National Steering CommitteeGoverns the market. Chaired by the Power Secretary, co-chaired by the Environment Secretary.
Bureau of Energy EfficiencyAdministrator. Proposes targets, issues certificates, accredits verifiers.
Grid Controller of IndiaRegistry. Registers entities and keeps transaction records.
Central Electricity Regulatory CommissionRegulates trading, which takes place on power exchanges.
Accredited carbon verification agenciesCheck the data that entities report.
Roles as set out in the Carbon Credit Trading Scheme, 2023 (S.O. 2825(E)).

How the compliance mechanism works

Named plants must meet a yearly target in tonnes of CO2e per tonne of equivalent product. Beating it earns certificates; missing it means buying them.

Because the target is an intensity, a plant can grow output and still comply. What counts is CO2e per tonne, not the total.

That also means a quiet year can hurt. Fixed loads such as lighting, compressors and idle boilers spread over fewer tonnes and push intensity up.

The Ministry of Power picks sectors and plants on BEE's advice. BEE studies each sector and proposes targets, taking account of available technology and its cost.

Under the 2025 rules, an obligated entity must register on the Indian carbon market portal and file documents as the detailed procedure requires.

If a plant does not file its documents, its shortfall is worked out as if it had stayed at its baseline intensity. That makes missing paperwork expensive.

Certificates can be banked for later years, as the detailed procedure allows. If a plant still fails to comply, the Central Pollution Control Board can order compensation of twice the average traded price. It is due within 90 days.

  1. BEE proposesTarget per tonne of product
  2. Environment ministry notifiesUnder the Environment (Protection) Act
  3. Plant reportsEmissions and output for the year
  4. Verifier checksAccredited agency
  5. CertificatesIssued for a surplus, surrendered for a shortfall
The compliance cycle under CCTS 2023 and the GHG Emission Intensity Target Rules, 2025.

The 173 textile units: what the schedule shows

The January 2026 schedule lists 173 textile plants by name, address and registration code. Every textile code starts with TXT.

We counted the entries by sub-sector: 60 spinning units, 34 processing units, 33 fibre units and 46 composite mills.

The codes end in a state abbreviation. Rajasthan (40) and Gujarat (35) have the most, followed by Tamil Nadu (17), Punjab (15) and Maharashtra (13).

Each row gives four numbers. They are the plant's 2023-24 output of equivalent product in tonnes, its 2023-24 baseline intensity, and its targets for 2025-26 and 2026-27.

Some rows show a dash for 2025-26, so check your own row. A buyer's mill may be on this list even if your garment unit is not.

The cuts differ widely from plant to plant. One spinning unit in Tamil Nadu (TXTOE001TN) keeps the same 0.1667 tCO2e per tonne in every year.

Another (TXTOE002TN) moves from 0.4355 to 0.4329 by 2026-27, a cut of about 0.6%. The composite mill in the next section must cut about 6.9%.

So do not plan from a sector average. Your own row is the only target that counts.

Textile units with CCTS targets, by sub-sector. Our count of the schedule in G.S.R. 25(E), 13 January 2026.
Need a footprint for a buyer?ISO 14067 method, PACT v3 file and a PDF report.
Get free estimate →

Worked example: certificates for one composite mill

The certificate sum is simple: target minus achieved intensity, times output. Here it is with one real row from the schedule and two made-up results.

The rules give the formula in that order. A positive result is certificates earned; a negative one is certificates to buy.

A composite mill in Gujarat, code TXTOE172GJ, has a 2023-24 baseline of 16.7463 tCO2e per tonne. Its 2026-27 target is 15.5990, about 6.9% lower.

Its 2023-24 output was 37,761 tonnes of equivalent product. Assume, for illustration, that output stays the same in 2026-27.

Target 15.5990 from G.S.R. 25(E); achieved intensity of 15.80 and output are assumptions for illustration.
  • If it achieves 15.80: it is 0.201 above target. Times 37,761 tonnes, it must buy about 7,590 certificates.
  • If it achieves 15.40: it is 0.199 below target. It earns about 7,514 certificates to sell or bank.
  • The lesson: a gap of 0.4 tCO2e per tonne moves the result by about 15,100 certificates. Monthly tracking of fuel, power and output pays off.

Offset mechanism: credits for factories without targets

A factory without a target can still earn certificates by registering a project under the offset mechanism. It must follow a methodology that BEE has published.

This route suits garment, bag and packaging units that buy fuel and power but sit outside the textile schedule.

In September 2024 BEE listed ten approved sectors in two phases. Phase 1 covers energy, industries, waste, agriculture, forestry and transport. Phase 2 covers construction, fugitive emissions, solvent use and carbon capture.

One published method fits many mills and garment units. BM IN02.001, dated 27 March 2025, covers energy efficiency and fuel switching at industrial sites. It is adapted from the UN's CDM method AMS-II.D.

Typical projects are efficient motors, pumps and boilers, as new installs or replacements. The method only works where the energy use can be measured and recorded directly.

The method defines an existing facility as one that ran for at least three years before the project started. It also needs the project's effect to stand out from other changes in energy use.

In practice, that means a year or more of clean baseline data before you change equipment. Meter the boiler or motor line first, then replace it.

A sector being on the list does not mean every technology has an approved method. Check BEE's current list before you plan a project.

Compliance mechanismOffset mechanism
WhoNamed obligated entitiesNon-obligated entities, voluntarily
DutyMeet a yearly intensity targetNone; projects are optional
How credits ariseBeating the targetMeasured reductions from a registered project
RulesGHG Emission Intensity Target RulesBEE sectoral methodologies
ExampleA composite mill on the scheduleA garment unit replacing old boilers
Based on CCTS 2023 as amended by S.O. 5369(E), and BEE's methodology BM IN02.001.

How CCTS differs from BRSR, product footprints and CBAM

These four are often mixed up. They measure different things for different audiences under different laws.

The key difference is the unit. CCTS counts tonnes of CO2e per tonne of product at one plant. A product footprint counts kilograms of CO2e for one item across its life, including fibre grown and spun elsewhere.

CCTS is Indian law for named plants. Obligated entities, textile units included, must disclose their Scope 1 and Scope 2 emissions (PIB).

BRSR reporting is SEBI's disclosure for listed companies. It can reach you as a supplier through value chain questions.

A product footprint is a per-item figure, usually built to ISO 14067. Buyers ask for it; CCTS does not. Our guide to the carbon footprint of jeans shows one product worked through.

CBAM is EU law on imports of cement, iron and steel, aluminium, fertilisers, electricity and hydrogen (European Commission). Its definitive regime started on 1 January 2026. Garments are not on that list; see CBAM and textiles.

Common mistakes manufacturers make with CCTS

The costliest mistakes are about paperwork and units, not technology. Each one below has a direct cost under the rules.

  • Assuming you are not named: search both schedules for your plant name and code before deciding.
  • Reading the wrong year: the 2025-26 textile target covers January to March 2026 only.
  • Mixing output units: targets are in tonnes of CO2e per tonne of equivalent product, as the schedule states. Do not convert them to pieces or metres.
  • Treating a certificate as an offset claim on a product: certificates belong to the plant's compliance account. They do not change a product's measured footprint.
  • Waiting for the year end: by then it is too late to close a gap. Track intensity every month.
  • Forgetting the verifier: an accredited agency must check your data. Book one early, not in the last weeks before filing.

What textile and garment manufacturers should do now

Your first step depends on whether your plant is named in a schedule. Either way, the work starts with the same fuel, electricity and output records.

If you buy yarn or fabric from a named mill, ask for its plant intensity figure. Supplier-specific data like this raises your primary data share in product footprints.

If you are not named, you have no CCTS target today. Buyers still want product-level figures, and the same records produce them.

A simple year plan works for both groups. In the first quarter, gather twelve months of bills and output. In the second, set up monthly tracking. In the third, compare your intensity with the target or with last year. In the fourth, fix the largest gap.

Named mills should also budget for verification and for certificates. A shortfall of a few thousand certificates is a real cost, and the market price is not known in advance.

CCTS readiness checklist
  • Search the October 2025 and January 2026 schedules for your plant
  • If named: register on the Indian carbon market portal
  • Line up an accredited carbon verification agency
  • Track fuel, electricity and output every month
  • Compare monthly intensity with your target
  • If not named: check BEE's offset methods for boiler or motor projects
  • Ask named mills in your supply chain for their intensity figures

Sources and further reading

Questions

What is the carbon credit trading scheme in India?

It is India's carbon market, notified by the Ministry of Power in June 2023. Named plants get intensity targets, and those that beat them earn certificates they can trade.

Is the textile sector covered under CCTS?

Yes. A notification of 13 January 2026 set targets for 173 textile units in spinning, processing, fibre and composite mills, against a 2023-24 baseline.

How many carbon credit certificates does a plant earn?

Target intensity minus achieved intensity, multiplied by the tonnes of equivalent product made that year. A negative result is the number it must buy.

What is the difference between the compliance and offset mechanisms?

The compliance mechanism sets binding targets for named plants. The offset mechanism lets other entities register voluntary projects and earn certificates under BEE's methodologies.

Who administers the Indian carbon market?

The Bureau of Energy Efficiency is the administrator. Grid-India runs the registry, and the Central Electricity Regulatory Commission regulates trading.

What happens if a plant misses its target?

It must surrender certificates to cover the shortfall. If it does not comply, the Central Pollution Control Board can order compensation of twice the average traded price.

Is CCTS the same as CBAM?

No. CCTS is Indian law covering emissions at named plants. CBAM is EU law on certain imported goods, and garments are not among them.

Can a garment factory earn carbon credits in India?

Yes, if it registers an eligible project under the offset mechanism and follows an approved method, such as BM IN02.001 for energy efficiency.

Footprints to send your buyersISO 14067 method, a PACT v3 file and a PDF report with every source.
Get free estimate →