← All guides
Basics • Materials

What is vegan leather? Types, layers, plastic content and footprint

By • • Updated • 9 min read

What is vegan leather? It is a sales name for any material that looks like leather but contains no animal hide. Most of it is a fabric coated with plastic, usually polyurethane (PU) or PVC. This guide shows how it is built, what a lab found inside named brands, and what drives the [product carbon footprint](/) of a bag or shoe made from it.

What is vegan leather? A plain definition

Vegan leather is a marketing term, not a material. It tells you what is missing, which is animal skin. It does not tell you what is inside.

Materials scientists use other names. A 2021 study in the journal Coatings lists artificial leather, synthetic leather, leatherette, faux leather, pleather and PU leather, among others. The authors, from the FILK Freiberg Institute, note that the European standard EN 15987 restricts how such terms may be used.

For a supplier, the name matters less than the recipe. A buyer's footprint figure, chemical test and claim all depend on the layers and their weights. The swing tag says none of that.

How vegan leather is made, layer by layer

Most vegan leather is a coated textile. The FILK study describes the usual build as a textile support covered by two or more polymer layers.

Each layer has a job. The fabric gives tensile and tear strength, and the foamed middle layer sets softness and feel.

The compact layer and topcoat set the look. A leather-like grain is usually embossed into the surface.

When the base is polyester and the coating is PU or PVC, the authors call the result a completely fossil-based material. That is the type you will be offered most often.

These materials are made on continuous lines, roll to roll. The FILK authors note that this ease of processing helped synthetic alternatives win market share. It also means the coating weight and the line's energy end up in the footprint.

Some PU coating lines use a solvent called DMF. An EU rule, Regulation (EU) 2021/2030, restricts DMF use in the EU to protect workers. It gave the direct and transfer PU coating of textiles extra time, until 12 December 2024.

  1. Textile supportKnit or weave; usually polyester
  2. Foamed middle layerPolymer foam, often PU, for softness
  3. Compact layerDense polymer skin over the foam
  4. TopcoatThin finish for colour and wear
  5. EmbossingLeather-like grain pressed in
How a PU-coated artificial leather is built up, based on Figure 1 of Meyer et al. (2021), Coatings 11(2):226. Real lines vary by maker.

The main types of vegan leather

There are five broad types. They differ in what replaces the hide and how much plastic remains.

The FILK study groups the newer materials into three concepts. These are grown animal-free materials, coated fabrics with plant-based additives, and non-woven fabrics with or without a finish.

Classic PU and PVC coated fabrics sit alongside them. Each type raises a different question to put to your material supplier.

PU-coated fabricPolyester base under foamed and compact PU. Most "PU leather".
PVC-coated fabricThe same layered build, with PVC as the coating polymer.
Plant-filled PUPU layers carrying fillers such as apple pomace or milled cactus.
Plant-fibre non-wovenA mat of plant fibres, such as pineapple leaf, with a thin coat.
Grown sheetsSingle layers from fungi or from bacteria and yeast, with no backing.
Five broad types of leather alternative, grouped from the structures described by Meyer et al. (2021).
  • PU or PVC coated fabric: ask for the coating weight in g/m2 and the base fabric. Those two inputs usually set most of the material footprint.
  • Plant-filled PU: ask what share of the coating, by weight, is plant filler. The FILK authors could not measure the plant share themselves.
  • Plant-fibre non-woven: ask what the finish is made of and how thick it is. The fibre mat often shows through a thin coat.
  • Grown sheets: ask for strength and flex test results. In the FILK tests, the two grown sheets missed the strength needed for shoe uppers.

What a lab found inside named materials

The FILK team examined nine commercial leather alternatives under the microscope and by infrared spectroscopy. Their results are a useful check on marketing copy.

Three plant-based materials had the same layer build as ordinary PU artificial leather. In the authors' words, the bulk of those materials still consists of polyurethane.

Treat these as findings on samples tested in 2021. Makers change recipes, so ask for the current composition before you repeat any of it.

Structure foundSynthetic layers
Desserto (cactus)Polyester base, foamed PU with plant fillerYes, PU-based
Appleskin (apple)Polyester base, foamed PU with plant fillerYes, PU-based
VegeaCellulose base, foamed PU with plant fillerYes, PU-based
Pinatex (pineapple leaf)Plant-fibre non-woven, thin coatCoat with PU/acrylate content
Muskin and KombuchaSingle layer of polysaccharidesNo coating, no backing
NoaniMicrofibre top, leather board middlePU/PVC-coated backing
Composition of samples tested by Meyer et al. (2021), Coatings 11(2):226, sections 3.1 and 4.1. Findings apply to the 2021 samples only.
  • Pinatex: the maker promotes a polylactide (PLA) finish, but the lab found a notable PU/acrylate content in it.
  • Noani: sold as vegan, yet its middle layer was leather board, made from leather fibres.
  • Grown sheets: they had no synthetic coat, but they fell well short of the strength needed for shoe uppers.

How long does vegan leather last? What the lab tests show

Durability varies widely by type. The FILK team ran standard shoe, glove and apparel tests, and none of the nine alternatives matched the all-round performance of leather.

The coated textiles reached tensile strengths of 9 to 20 N/mm2, mostly set by the base fabric. For comparison, the ISO 20942 specification for chrome-tanned shoe upper leather is above 15 N/mm2.

Flexing is the classic failure point for shoes. Leather, the PU-coated reference fabric and Pinatex passed more than 80,000 flex cycles. Three other alternatives did not reach the level needed.

Breathability split the field. Desserto, Appleskin, Vegea and Teak Leaf fell short of the ISO 20942 water vapour level, while the PU-coated reference and Pinatex met it.

Why does this matter for carbon? A product that lasts longer spreads its footprint over more use. A bag that cracks in a year has a higher footprint per year of use than one that lasts five.

0 of 9alternatives matched leather's all-round performance
9 to 20N/mm2 tensile strength of the coated textiles
80,000+flex cycles passed by the PU-coated reference and Pinatex
Meyer et al. (2021), Coatings 11(2):226, sections 3.4 to 3.6 and Conclusions. Results apply to the samples tested.
Need a footprint for a buyer?ISO 14067 method, PACT v3 file and a PDF report.
Get free estimate →

Is vegan leather plastic?

Mostly, yes. PU-coated and PVC-coated fabrics are plastic throughout, and several plant-based types still rely on PU layers or a polymer coat.

EU law gives a useful test. The Single-Use Plastics Directive defines plastic as a polymer material that can act as a main structural part of a product. Natural polymers that are not chemically modified are excluded.

Under that definition, a bio-based PU or PLA still counts as plastic, because it is made, not grown. The definition is written for that directive, and this is general information, not legal advice.

The base fabric counts too. The European Environment Agency notes that synthetic textile fibres are made from oil and natural gas, and polyester is the usual base.

The carbon footprint of vegan leather materials

Our calculator uses 11.7 kg CO2e per kg for PU synthetic leather. The value is derived from a per-square-metre figure, and its status in our library is contested. Treat it as a screening figure.

The chart sets it beside other materials found in bags and shoes. Each bar is per kg of material, so the weight used in a product matters as much as the factor.

Our PU factor is derived from about 7 kg CO2e per square metre at roughly 0.6 kg per square metre. A heavier or lighter coating moves both numbers, so ask your coater for its own weight.

Plant matter changes the result only through the share it replaces. If a filler replaces 20% of the PU by weight, the other 80% of the coating's footprint stays.

One more point on method. Our factor covers making the material. Any carbon the plant part took from the air belongs on a separate biogenic carbon line, not netted off against the PU.

Emission factors our calculator uses per kg of material (India production where relevant). Sources and status on each material page and on our emission factors page.
  • Coating polymer and weight: grams of PU or PVC per square metre is usually the biggest lever.
  • Base fabric: a polyester base carries the footprint of polyester fibre; a cotton or cellulose base carries its own.
  • Plant share: carbon taken up by plants is reported separately as biogenic carbon.
  • Process energy: coating lines dry and cure with heat, so the mill's fuel and grid matter.
  • Cutting yield: offcuts from panels belong to the product's footprint.

Worked example: a PU-coated crossbody bag

Take a crossbody bag that uses 0.5 kg of PU-coated fabric. At 11.7 kg CO2e per kg, that material alone carries about 5.85 kg CO2e.

Lining, zips, sewing, transport and packaging come on top. Bags are rarely washed, so materials and production make up most of their footprint.

Shoes show the same pattern. With no washing stage, the materials in the upper and sole carry a large share of the total.

Now add a 0.1 kg polyester lining at 3.86 kg CO2e per kg. That adds about 0.39 kg CO2e, so the two main materials reach about 6.2 kg CO2e before sewing.

The lesson is simple. For coated goods, ask for the coating weight first. One input can move the total more than everything else combined.

Activity data times emission factor. 11.7 kg CO2e/kg is our derived, contested screening factor for PU synthetic leather; replace it with your coater's figure when you have one.

What buyers check before they accept vegan leather

Buyers check three things: what the material is, what chemicals it holds, and what you can claim about it. A short data pack answers most of their questions before they ask.

Chemicals come up often. In the FILK study, the PU-coated reference fabric held notable amounts of DMF and toluene, and restricted substances also turned up in several plant-based samples.

Note what that EU DMF rule does and does not do. It limits how DMF is used and supplied inside the EU to protect workers; it does not set a DMF limit for finished bags or shoes. If a buyer has its own restricted substance list, test against that.

Claims matter too. If you sell into the EU, read our guide to the EU rules on environmental claims before you print words like "planet-friendly" on a tag.

Vegan leather data pack for a buyer
  • Composition by layer: polymer type and weight % for base, foam, skin and topcoat
  • Finished weight in g/m2, plus area used per product
  • Plant or bio-based share by weight, with the test behind it
  • Chemical test report against the buyer's restricted list
  • Coater's footprint per kg or per m2, with its method, or a named proxy
  • One product footprint with the boundary stated
  • Common mistake, calling it plastic-free: plant-filled PU is still mostly PU, according to the FILK analysis.
  • Common mistake, quoting a plant share alone: "30% plant-based" also says that 70% is something else.
  • Common mistake, assuming no animal material: one sample sold as vegan had a leather board layer.
  • Common mistake, comparing per kg only: materials differ in weight per square metre, so per-kg and per-product rankings can differ.
  • Common mistake, ranking it against hide leather without a study: a fair comparison needs both footprints built on the same method, boundary and declared unit.

What to do next

Whatever the answer to what is vegan leather for your product, the footprint comes from its layers and their weights. Start with an estimate, then replace the biggest guesses with your own data.

Our methodology page explains which factors we use and how we mark contested ones. For the standard behind a full figure, see our guide to ISO 14067.

  1. 1
    Get the recipeAsk the coater for layers, polymers and g/m2
  2. 2
    Screen the productPaste a product link into the free estimate
  3. 3
    Replace the big inputsSwap the PU factor for the coater's own figure
  4. 4
    Build the full footprintAdd trims, energy, transport and packaging
  5. 5
    Share itSend the buyer one figure per product with its boundary
A practical order of work for a bag or shoe maker.

Sources and further reading

Every figure above was read at these primary sources in November 2026.

  • Meyer, Dietrich, Schulz and Mondschein (2021), Comparison of the Technical Performance of Leather, Artificial Leather, and Trendy Alternatives: Coatings, MDPI
  • Plastic in textiles: towards a circular economy for synthetic textiles in Europe (2021): European Environment Agency
  • Directive (EU) 2019/904 on single-use plastics, Article 3(1): EUR-Lex
  • Commission Regulation (EU) 2021/2030 on N,N-dimethylformamide: EUR-Lex
  • Tran and West (2021), Decarbonisation options for the Dutch bottle-grade PET industry: PBL and TNO

Questions

What is vegan leather made of?

Most is a polyester fabric coated with PU or PVC. Other types use plant fillers in PU, a plant-fibre non-woven with a thin coat, or single sheets grown from fungi or bacteria.

Is vegan leather real leather?

No. It contains no animal hide. Check the composition anyway, because one sample sold as vegan in a 2021 lab study had a leather board layer.

Is PU leather the same as vegan leather?

PU leather is the most common type of vegan leather, but not the only one. PVC-coated fabric, plant-fibre non-wovens and grown sheets are also sold under the name.

Is vegan leather plastic?

Usually, yes. PU and PVC coated fabrics are plastic, and the 2021 FILK study found PU layers in several plant-based brands.

Is vegan leather biodegradable?

It depends on the recipe. PU and PVC are fossil plastics, and bio-based plastics are not necessarily biodegradable, so ask for a lab result.

How long does vegan leather last?

It depends on the type. In a 2021 lab study, none of nine alternatives matched leather overall, but the PU-coated reference and Pinatex passed more than 80,000 flex cycles, so ask for test results on your exact material.

What is the carbon footprint of vegan leather?

Our calculator uses 11.7 kg CO2e per kg for PU synthetic leather, a derived value marked contested. A product's figure also depends on coating weight, base fabric, energy and cutting waste.

Does vegan leather have a lower footprint than animal leather?

There is no general answer. Compare two products only when both footprints use the same method, boundary and unit.

Footprints to send your buyersISO 14067 method, a PACT v3 file and a PDF report with every source.
Get free estimate →