← All guides
Methods & standards • EPD

Environmental product declaration: what it is and when you need one

By • • Updated • 9 min read

An environmental product declaration (EPD) is a standard-format, independently checked report of a product's environmental impacts across its life cycle, published through a programme operator. It covers many impacts, not only carbon. This guide explains the new 2026 edition of ISO 14025, how an EPD is made, how it differs from a product carbon footprint, and how a textile or packaging supplier can tell which one a buyer needs.

What is an environmental product declaration?

An environmental product declaration reports the results of a life cycle assessment (LCA) in a fixed format. It is built under rules for its product type, checked by an independent verifier and registered with a programme operator.

The governing standard is ISO 14025. In June 2026 ISO published its second edition, ISO 14025:2026, titled around environmental product declarations (EPDs). It runs to 40 pages and comes from ISO/TC 207/SC 3.

The new edition sets principles and requirements for EPD programmes and their EPDs. It requires the LCA behind an EPD to follow ISO 14040 and ISO 14044. Related social and economic aspects may be added as extra information, but social and economic LCA indicators are outside it.

The 2006 edition is now withdrawn. It called these documents "Type III environmental declarations" and said they were mainly for business-to-business use, according to its ISO page.

2026ISO 14025 second edition (June)
40pages in the new edition
90 daysto register after the EPD's version date*
3routes to an independent check*
Sources: ISO catalogue entries for ISO 14025:2026 and ISO 14025:2006. *International EPD System, EPD development page.

What an EPD contains, and what it must avoid

An EPD contains measured results, not judgements. It sets out the product, the declared or functional unit, the life-cycle stages covered and the impact results the rules require.

The International EPD System says an EPD must avoid ratings, value judgements and direct comparisons with other products. It must also be relevant and not misleading. A buyer compares EPDs themselves; the EPD does not do it for them.

This is why the format is strict. Two EPDs built on the same PCR use the same unit, stages and indicators, so a specifier can set them side by side. The document itself stays neutral.

Construction products are a special case. In that programme, products covered by the European standard EN 15804 also follow the communication rules in EN 15942 for business-to-business use.

  • Product description: what it is, what it is made of and where it is made.
  • Unit: what one result describes, such as one square metre of fabric or one kilogram.
  • Stages: which life-cycle stages are included, as the product rules require.
  • Results: several impact indicators, including a climate result in kg CO₂e.
  • Verification and registration: who checked it and the registration number.

Product category rules: the recipe for each product type

Product category rules (PCRs) set exactly how to run the LCA and report results for one product type. Every EPD must follow a PCR, so EPDs for similar products are built the same way.

In the International EPD System, the PCR must be listed in its library and valid on the day of verification. If several fit, it recommends the one with the most specific scope.

For fabric makers, the rule is the Fabrics PCR 2022:04. Version 1.0.4 was published on 16 February 2026 with a six-month extension and is valid until 23 February 2027.

It covers woven, tufted, knitted, crocheted and special fabrics. Nonwovens are excluded and are pointed to other PCRs. An update to version 2.0.0 began on 28 November 2025, with publication expected in the first half of 2027. All of those dates are preliminary.

If no PCR fits, a new one can be developed, subject to the operator's approval. That adds time, so search the library first.

  1. 28 Nov 2025
    Fabrics PCR update to v2.0.0 starts
  2. 16 Feb 2026
    v1.0.4 publishedSix-month validity extension
  3. Q4 2026 – Q1 2027
    Open consultation plannedPreliminary
  4. 23 Feb 2027
    v1.0.4 valid until
  5. Q1/Q2 2027
    v2.0.0 publication expectedPreliminary
Source: International EPD System PCR library entry for Fabrics, PCR 2022:04, read November 2026.
  • Products covered: which items the rule applies to, and which it leaves to other rules.
  • Unit: what one result describes, so similar products share a basis.
  • Stages: which parts of the life cycle must be included.
  • Calculation and reporting: how each result is worked out and how it is presented.

How an environmental product declaration is made

Making an environmental product declaration takes five steps: choose the PCR, run the LCA, prepare the EPD, have it checked, then register and publish. The steps below follow the International EPD System.

The check can be done by an approved individual verifier, an accredited certification body, or, for some pre-checked tools, an approved tool verifier.

Registration has to happen within 90 days of the EPD's version date, and fees apply. An EPD stays published while fees are paid. An expired EPD must be updated within one year to regain validity.

Most of the elapsed time sits in step two. The LCA needs a full year of factory data, supplier information for the main materials and modelling to the PCR. Plan the data collection before you approach an LCA practitioner.

For an Indian textile exporter, that usually means meter readings by department, fuel bills for boilers and generators, and fabric weights by style. The same records feed a carbon footprint, so the work is not wasted if the buyer later wants only carbon.

  1. 1
    Select the PCRValid on the day of verification
  2. 2
    Run the LCAISO 14040, ISO 14044, ISO 14025 and the PCR
  3. 3
    Prepare the EPDOperator's compiler format or standard format
  4. 4
    VerifyIndependent verifier or accredited body
  5. 5
    Register and publishWithin 90 days of the version date
The five steps as set out by the International EPD System, read November 2026.

Environmental product declaration vs product carbon footprint

The main difference is scope. An EPD reports several environmental impacts. A product carbon footprint (PCF) reports climate change only.

ISO 14067, the PCF standard, says it addresses a single impact category. ISO 14025 covers the potential environmental impacts and aspects of a product more widely.

Both rest on ISO 14040 and ISO 14044. So the factory data you collect for one is largely the data you need for the other. Our guide to carbon footprint vs life cycle assessment explains the link.

EPDProduct carbon footprint
StandardISO 14025 plus a PCRISO 14067, often with PACT
ImpactsSeveral, including climateClimate change only
Independent checkRequiredOptional; a critical review if done
PublicationRegistered and publicUsually shared privately with a buyer
FormatDocument in the operator's formatReport plus, often, a PACT data file
Typical useTenders and specifiersA brand's Scope 3 and product data
Sources: ISO 14025:2026 and ISO 14067:2018 abstracts; International EPD System; PACT Methodology V3.

The GWP naming trap

EPDs report the climate result as GWP, in kg CO₂e per unit. That is the same quantity a carbon footprint reports.

The US EPA notes that the ISO and EPD community uses the term GWP differently from the IPCC. For the IPCC, GWP compares one gas with CO₂, for example 27 to 30 for methane over 100 years. In an EPD, "GWP" often means the product's whole climate result.

So when a buyer asks for "the GWP from your EPD", they usually want the product's kg CO₂e. When a scientist says "the GWP of methane", they mean a conversion factor.

Check the unit before you copy a figure across. An EPD result per square metre of fabric is not the same as a footprint per finished garment. Converting needs the fabric weight and cutting waste for that style.

Need a footprint for a buyer?ISO 14067 method, PACT v3 file and a PDF report.
Get free estimate →

A worked example: what changes from a footprint to an EPD

Take a cotton T-shirt that already has a carbon footprint, built from the maker's own data.

The footprint reports one climate figure in kg CO₂e, split by stage: raw materials, production, packaging, use and end of life.

An EPD for the same shirt would start from the same data. It would then add the other indicators the PCR sets out. The whole result would be checked and published. The climate line would sit beside them, not alone.

The extra work is in the extra indicators, the PCR's rules and the verification. That is where the extra time and cost of an EPD come from.

Types of EPD a programme can register

Not every EPD covers one product from one factory. The International EPD System lists several types, and one EPD can belong to more than one.

For a textile group with many similar fabrics, a multiple-product EPD can save effort. For an industry body, a sector EPD can give members a shared reference.

Check which type a buyer will accept before you start. A sector EPD describes an industry, not your factory, so it cannot show the effect of your own changes.

Single productOne product or service from one maker. The most common type.
Multiple productsSeveral products from the same company in one EPD.
SectorProducts within a defined industry sector.
Published by a traderIssued by a trader rather than the maker.
Not yet on the marketFor a product that has not been launched.
Recently on the marketFor a product launched recently.
EPD types listed by the International EPD System, What is an EPD page, read November 2026.

When does a textile or packaging supplier need an EPD?

You need an environmental product declaration when a buyer, tender or rule asks for one by name. If the request is for kg CO₂e per product, a carbon footprint is usually enough.

Most requests that reach apparel, bag and packaging suppliers ask about carbon only. They come from brands filling in Scope 3. See Scope 3 and supplier product footprints for why they ask.

Scale matters too. An EPD is built product by product or for a defined group. A footprint tool can cover a supplier's whole range of styles at once.

Time matters as much as scale. A brand that needs figures for this season's styles will rarely wait for an EPD. A public tender with a fixed specification may accept nothing else.

When in doubt, ask four questions: which standard, which impacts, which unit, and whether an independent check is required. The answers usually settle it.

  1. Read the requestWhich words does it use?
  2. Names EPD or ISO 14025?Then an EPD is needed
  3. Asks for kg CO₂e per item?A carbon footprint fits
  4. Asks for a PACT file?A footprint with a data file
  5. Unsure?Ask which standard, impacts and unit
A quick way to read a buyer's request. Our guidance, based on the scopes of ISO 14025 and ISO 14067.
  • Choose an EPD if: the tender names an EPD, ISO 14025 or a programme operator; the buyer wants a public document; or impacts beyond carbon matter.
  • Choose a footprint if: the buyer wants kg CO₂e per item, a Scope 3 figure or a PACT data file.
  • Do both, in order, if: you expect EPD requests later. Build the footprint first, then reuse the data for the EPD's LCA.

Common mistakes and what buyers check

Most EPD problems start before the LCA. The wrong PCR, the wrong unit or an expired rule can undo months of work.

Before you start an EPD
  • The PCR covers your product (nonwovens are not in the Fabrics PCR)
  • The PCR will still be valid on the day of verification
  • The declared unit matches what the buyer compares
  • Twelve months of factory data are ready
  • Verifier route chosen and budgeted
  • Registration planned within 90 days of the version date
  • Calling an EPD a label: it reports figures and must avoid ratings and value judgements.
  • Comparing EPDs built on different PCRs: results line up only when the rules match.
  • Treating the EPD's GWP as the whole story: it is one indicator among several.
  • Letting it expire: an expired EPD must be updated within a year to regain validity.
  • Sending the whole EPD when only carbon was asked: point the buyer to the climate line and its unit, or send a footprint instead.

What to do next

Collect the factory data both documents need: twelve months of electricity, fuel, water, materials and waste by product line. Our guide to allocating factory energy shows how to split shared meters.

Confirm the declared unit the buyer expects, then search the operator's PCR library and note the version and expiry date.

Run a free screening estimate to see which materials and stages matter most. If the buyer only needs carbon, a full footprint may answer the request in days rather than months. Compare costs with our notes on product carbon footprint cost.

Sources and further reading

The documents this guide draws on, at their publishers:

Questions

What is an environmental product declaration in simple terms?

A standard-format report of a product's environmental impacts over its life cycle. It is based on an LCA, checked by an independent verifier and published by a programme operator.

Is an EPD the same as a carbon footprint?

No. A carbon footprint under ISO 14067 covers climate change only. An EPD under ISO 14025 reports several impacts, including a climate result in kg CO₂e.

Which standard replaced ISO 14025:2006?

ISO 14025:2026, published in June 2026 as the second edition. It is titled around EPDs and still requires LCA under ISO 14040 and ISO 14044.

What is a PCR in an EPD?

A product category rule sets how to run the LCA and report results for one product type. Every EPD must follow a valid PCR.

Is there a PCR for textiles?

Yes. The International EPD System's Fabrics PCR 2022:04 covers woven, knitted and other fabrics but not nonwovens. Version 1.0.4 is valid until 23 February 2027.

How long does an EPD stay valid?

In the International EPD System it stays published while fees are paid. An expired EPD must be updated within one year to regain validity.

Who can verify an EPD?

In the International EPD System, an approved individual verifier, an accredited certification body or, for pre-checked tools, an approved tool verifier.

Can I compare two EPDs?

Only with care. EPDs avoid direct comparisons themselves, and results line up only when the PCR, unit and stages match.

Footprints to send your buyersISO 14067 method, a PACT v3 file and a PDF report with every source.
Get free estimate →