Description says “The upper is made from a sugarcane bagasse-based fabric, which Ethik describes as a plant-based leather alternative made from sugarcane waste. The footbed is woven from handloom hemp, the lining is grey felt to reduce friction, and an adjustable gold-finish buckle sets the fit.”
Carbon footprint
12.03kg CO₂e
per pair, whole life · sold in India · made in India
FIG. 01Where 12.03 kg CO₂e comes from: per pair, whole life. A screening estimate from the listing and published data.
Change anything below and the footprint recalculates. What you change is marked “Stated”. Nothing here is saved.
Sold in
Freight
Materials
Part
Material (kg CO₂e per kg)
Share %
Mass
Source
Material
Named material
137 g
Estimated
Primary source
Material
Named material
137 g
Estimated
Contested
Material
Named material
137 g
Estimated
Contested
Sole (category default)
Category default ⓘ
338 g
Default
Contested
Raw materials24%2.88 kg
Production69%8.36 kg
Packaging3%0.38 kg
Distribution1%0.13 kg
End of life2%0.27 kg
11.13 kgincluding carbon taken up by plants
11.62 kgup to the factory gate
6.23–53.79likely range, 95%
In everyday terms, about the same as driving 71 km in a petrol car, 1,504 smartphone charges, or 0.5 tree-years of absorption.
Is this your product?Replace our defaults with your own materials, energy and supplier data. The biggest lever here: run the factory on solar electricity.
Everything behind the figure, for auditors and the curious. Built to the requirements of ISO 14040/44, ISO 14067 and PACT v3.
Standards checkISO 14040/44, ISO 14067 and PACT v3, requirement by requirement
Standards check · ISO 14040/44 · ISO 14067 · PACT v3Screening estimate: not a full footprint study
ISO 14040/14044
Does not conform
12 met · 1 justified · 1 not met · 1 need reviewer
ISO 14067
Does not conform
19 met · 2 justified · 3 not met · 1 need reviewer
PACT
Does not conform
12 met · 1 justified · 5 not met · 1 need reviewer
All 30 requirements, with clauses
Requirement
ISO 14040/44
ISO 14067
PACT v3
The study's purpose is written down
Met
§4.2.2
Met
§6.3.1
—
No public claim that one product beats another
Met
§4.2.2; Amd 1 Annex C
Met
§Annex A, Annex B
—
The unit is clear, and a partial footprint is labelled as such
Met
§4.2.3.2
Met
§6.3.3
Met
§3.2.4
The system boundary is described
Met
§4.2.3.3
Met
§6.3.4, 7.3 b
Met
§3.2.3
The time period is stated and justified
—
Met
§6.3.6
Met
§3.2.3
Product category rules are used where they exist
PEFCR Apparel & Footwear v3.1 (EU) applies to this category. This screening estimate does not follow it: it uses MFP screening defaults for processing, use and end of life, so it is not a PEFCR study (ISO 14067 §6.2). Fix: Follow the category rules that apply to this product.
—
Justified
§6.2
Justified
§3.1.2
Anything left out is small, estimated and reported
Met
§4.2.3.3.3
Met
§6.3.4.3
Met
§3.3.1.2
The data is checked for consistency
Met
§4.3.2–4.3.3
Met
§6.4.3
—
Own processes use measured data, or say why not
—
Met
§6.3.5
Met
§4.1.3
Every database value is referenced and fit for purpose
1 line(s) without a source or link. Fix: Add the missing source URLs.
Not met
§4.3.2
Not met
§6.3.5
Not met
§4.1.3.2
Shared factory burdens are split by the standard rules
Not applicable
§4.3.4
Not applicable
§6.4.6
Not applicable
§3.3.1.4
Recycling is counted with the cut-off method
Met
§4.3.4.3
Met
§6.4.6.3
Met
§3.3.2.2
Electricity covers its whole life cycle
Met
§4.3.2–4.3.3
Met
§6.4.9.4.1
Met
§3.3.2.3
Electricity follows the market-based rules
—
Met
§6.4.9.4.4
Met
§3.3.2.3, Box 7
Land-use change is counted and shown separately
factor does not state whether dLUC is covered for m1, m2, m3, pk1, pk2. Fix: Use a factor with a separate dLUC result, or supply material.land_use_change with its value, source, year and whether the material factor already includes it. A documented no-LUC statement can resolve an unknown coverage gap.
—
Not met
§6.4.9.5
Not met
§3.3.2.4
Biogenic carbon is counted in and out
No carbon content for m2, so its biogenic uptake and content are missing. Fix: Supply measured carbon content for these materials.
—
Not met
§6.4.9.2, 6.4.9.3, 6.5.2
Not met
§3.3.2.4
Air freight is shown separately, without radiative forcing
—
Not applicable
§6.4.9.7
Not applicable
§3.3.2.1
No offsets or avoided emissions
—
Met
§6.3.4.1
Met
§3.3.2.2
Latest IPCC warming factors (AR6, 100 years)
100.0 % of cradle-to-gate emissions use AR5, unstated factors; PACT allows only the latest IPCC report once its grace year has passed. Fix: Replace these factors with AR6-characterised data.
Justified
§4.4.2
Justified
§6.5.1
Not met
§3.2.2
Fossil and biogenic methane are kept apart
—
Met
§6.5.2
—
Key choices are stress-tested
Met
§4.5.3.3
Met
§6.4.5, 6.6
—
Uncertainty is assessed
—
Met
§6.6
—
Data quality is scored
Met
§4.2.3.6
Met
§6.3.5
Met
§4.2.2, 4.2.3
Limitations are stated
Met
§4.5.4
Met
§6.6, Annex A
—
Results are broken down the required way
—
Met
§7.2
Met
§3.3.1, data model
The study report contains every required item
Met
§5.2
Met
§7.3
—
The PACT data file is complete
Missing or invalid: companyIds, productIds. Fix: Add company and product identifiers (URNs such as urn:mfp:company:acme), the reference period and a PACT unit.
—
—
Not met
§6.1; Tech Specs v3.0.3
The primary data share is reported
—
—
Met
§4.2.2
Independent critical review
No critical review recorded. Fix: Commission an ISO 14071 critical review before any public communication; a panel review is mandatory for public comparisons.
Needs reviewer
§6
Needs reviewer
§8
—
Third-party verification of the calculation model
The MFP footprint calculation model has not yet been verified by a third party. Fix: Commission limited-assurance verification of the calculation model (PACT v3 §5.3.3, Tables 14–15).
—
—
Needs reviewer
§5.3.3
These standards apply to studies. This checklist reports the implemented checks; it is not certification or a substitute for independent review. “Needs reviewer” items (critical review, verification of the calculation model) can only be closed by an independent third party.
Assumptions and defaults29 entries, 4 warnings
Warnings · 4
m2: Plant-based leather has no verified carbon content, so fossil CO₂ from its incineration is not counted.
m4: Synthetic rubber (SBR) has no verified carbon content, so fossil CO₂ from its incineration is not counted.
Grid electricity uses location-based national or regional averages. PACT v3 and Catena-X require the market-based residual mix where contractual instruments exist; supply electricity_factor for contracted or residual-mix power.
Temporal scores for desnz_2025, nova_2019 use the edition year; their underlying data are older, so those temporal scores may be better than the data deserve.
Assumptions register · 29 entries
Screening mode: this listing gives no primary data, so every input below that is not a stated material or weight is a named screening default. The result is not PACT-conformant (primary data share 0 %).
Product mass 0.75 kg is a category typical value for "footwear", not a measured weight.
Country of manufacture not stated in the listing; India assumed.
m1: material share 18 % is estimated from the listing text.
m2: Plant-based leather is not in the published factor library; screening proxy proxy_plant_leather_kg (CONTESTED, technological score 4) used.
m2: material share 18 % is estimated from the listing text.
m3: Moulded pulp / bagasse is not in the published factor library; screening proxy proxy_moulded_pulp_bagasse (CONTESTED, technological score 4) used.
m3: material share 18 % is estimated from the listing text.
m4: Synthetic rubber (SBR) is not in the published factor library; screening proxy proxy_sbr_rubber (CONTESTED, technological score 4) used.
m4: material matched from "Sole (category default)" (category default, LOW confidence): sole material not stated; synthetic rubber assumed for footwear.
m4: material share 45 % is a category default.
Textile cutting and making loss 15 % of fabric input (PEF-style screening default), sent to landfill.
Packaging not stated; screening default for footwear: Shoebox 300 g corrugated board, Tissue 20 g paper, recycled.
Yarn spinning: 0.161 kg fibre × Ring spinning (cotton, ~200 dtex) electricity: 3.4 kWh per kg yarn (van der Velden, Patel & Vogtlander, Int J LCA, 2014).
Weaving: 0.161 kg × Weaving (air-jet) electricity: 3.6 kWh per kg fabric (van der Velden et al., Int J LCA, 2014).
Dyeing & finishing: 0.161 kg × Dyeing & finishing (wet processing) energy: 7 kWh per kg fabric (electricity + thermal) (Quantis, Measuring Fashion, 2018 (dyeing & finishing = 36% of apparel GHG, largest stage)); thermal energy is modelled as grid electricity (no fuel split available).
Footwear moulding, stitching & assembly: Footwear manufacturing & assembly energy: 8 kWh per pair (Derived from Cheah et al. (MIT, 2013): manufacturing ≈ two-thirds of ~14 kg CO2e per running shoe pair, coal-heavy grid).
Process energy is unmetered screening data (activity uncertainty GSD 1.5–2.0), on the IN grid.
Inbound transport of materials to the factory is left out of the total, because supplier locations are unknown; its likely size is estimated and reported under the cut-off rule below.
Distribution route is a screening default (1,000 km road), carrying product plus packaging.
Cut-off rule: processes are excluded only where no verified data exists, and each exclusion is estimated where possible and reported (ISO 14044 §4.2.3.3.3). Inbound transport is estimated at 0.0484 kg CO₂e.
Carbon content of cellulose computed from repeat-unit stoichiometry (0.4445 kgC/kg), pure polymer basis (additives, moisture and finishes ignored).
Secondary (library) factors are scored at least 3 on technology: PACT v3 Table 12 reserves scores 1-2 for primary data.
Paper/board carbon: IPCC 2006 Vol.5 Table 2.4 defaults (90 % dry matter, 46 % C of dry, 1 % fossil).
Use-phase scenario: No energy-using use phase for footwear.
End-of-life route shares: MFP screening scenario for India, not PEFCR: textiles and leather goods 80 % landfill / dump, 5 % burning; plastics 60 % / 10 %; paper 40 % / 5 %; metals and glass 50 % landfill; the rest recovered (cut-off). Anchored on CPCB Annual Report on Solid Waste Management 2021-22 (24 % landfilled, 22 % unaccounted).
Incineration: 100 % oxidation of carbon assumed (IPCC 2006 Vol.5 Ch.5 default oxidation factor for MSW incineration). Energy-recovery credits are not applied under cut-off.
Aggregated secondary factors are used as published in their own GWP basis (AR5, unstated); only gas-split fuel factors and direct gas emissions are characterised with AR6. Residual inconsistency is typically a few percent for CO2-dominated factors.
Sources quoted as published figures (not open-licensed datasets): nova_2019, screening_proxy. Replace with licensed or supplier data before external or comparative claims.
Every line of the calculation33 lines: activity × factor, with sources
Full inventory
Footprint = Σ activity × emission factor
Every line: how much (activity) × how much CO₂e per unit (factor), with its source. Source labels
Screening carbon footprint shown on the Made for Planet catalogue so brands and buyers can see where a product's emissions come from. Reasons: No company data is available for this listing; a transparent estimate from the listing and published factors shows the likely size and the main stages. Audience: Brands and buyers (business-to-business). The estimate is also displayed on madeforplanet.com, labelled as a screening estimate; it is not an environmental claim the brand may use in marketing. Public comparative assertion: no.
Functional or declared unit and reference flow
§7.3 a
Functional unit: one footwear delivered and used to the end of its life, sold in India; reference flow 0.75 kg of product.
System boundary
§7.3 b
cradle to grave. Screening: materials, processing energy, packaging, distribution, use and end of life. Capital goods are excluded, as is usual for attributional product footprints. Stages modelled: raw_materials, production, packaging, distribution, end_of_life.
Significant unit processes
§7.3 c
plant_based_leather (virgin) (11.41 %); sbr_rubber (virgin) (10.94 %); wet_processing: grid electricity IN (7.64 %); assembly: grid electricity IN (54.1 %)
Data sources
§7.3 d
Carbon Footprint and Sustainability of Different Natural Fibres (de Beus, Carus, Barth) 2019; UK DESNZ Greenhouse gas reporting: conversion factors 2025 2025 (flat file); Carbon intensity of electricity (Ember via Our World in Data) 2026 release (2025 data); MFP screening proxies proxies.1
Greenhouse gases considered
§7.3 e
CO₂, CH₄ (fossil and biogenic), N₂O and refrigerant gases (HFCs, SF₆, NF₃) where present; secondary factors cover the gases their publishers include.
Characterisation factors
§7.3 f
IPCC AR6 GWP100 with climate-carbon feedbacks; secondary factors in their published basis where no AR6 version exists (see gwp check).
Cut-off criteria and exclusions
§7.3 g, o
Inbound transport of materials to the factory: 0.048427 kg CO₂e (screening estimate: 0.773 kg of materials × 500 km by average lorry (UK DESNZ GHG conversion factors 2025, Freighting goods + WTT delivery vehicles); supplier locations are not known)
Allocation procedures
§7.3 h
No multi-output processes. Recycling: cut-off.
Timing of emissions
§7.3 i, 6.4.8
All emissions and removals counted as at the start of the assessment period; no delayed-emission weighting.
Data description and quality
§7.3 j
PACT Table 12 DQR: technological 3.23, geographical 2.11, temporal 1.93; per-line scores, confidence and 95 % uncertainty in the inventory.
Sensitivity and uncertainty
§7.3 k
0 sensitivity case(s); lognormal Monte Carlo on pedigree uncertainty.
Climate change only: other impacts (water, land, toxicity, biodiversity) are not assessed, so a lower footprint does not mean a lower environmental impact overall. Secondary factors limit accuracy as shown by the data-quality scores.
Value choices
§7.3 n
Cut-off for recycling (PACT); economic allocation only above a 5× value ratio; conservative factor where published values disagree (see sensitivity).
Scope changes and exclusions
§7.3 o
None.
Life-cycle stages, use and end-of-life scenarios
§7.3 p, 6.3.7, 6.3.8
Use-phase scenario: No energy-using use phase for footwear. End-of-life route shares: MFP screening scenario for India, not PEFCR: textiles and leather goods 80 % landfill / dump, 5 % burning; plastics 60 % / 10 %; paper 40 % / 5 %; metals and glass 50 % landfill; the rest recovered (cut-off). Anchored on CPCB Annual Report on Solid Waste Management 2021-22 (24 % landfilled, 22 % unaccounted).
Influence of alternative scenarios
§7.3 q
No alternatives available for the choices made.
Period the footprint represents
§7.3 r, 6.3.6
2026-01-01 to 2026-12-31: current production as represented by the factor library (each factor's own data year is scored in the temporal data quality)
Product category rules
§7.3 s, 6.2
PEFCR Apparel & Footwear v3.1 (EU) applies to this category. This screening estimate does not follow it: it uses MFP screening defaults for processing, use and end of life, so it is not a PEFCR study (ISO 14067 §6.2).
Performance tracking
§7.3 t, 6.4.7
Not a performance-tracking study.
ISO 14067 counts biogenic removals (−1) and emissions (+1) in the carbon footprint; the PACT headline excludes biogenic uptake. Both are shown.
PACT v3 data and biogenic carbonData-exchange values and a downloadable file
PACT v3 data model (cradle-to-gate) and biogenic carbon balance
Download PACT v3.0.3 JSONProductFootprint in the Technical Specifications v3.0.3 format (decimals as strings). Check the conformance panel before sending it.
